Pur Line RAFY 70 Manual De Instrucciones página 6

Idiomas disponibles

PARTS

1. Time setting switch

2. Negative ion, cold wind, oscillation

3. Wind outlet

4. Horizontal blade

5. Vertical blade

6. Front board

7. Castors

OPERATION

CONTROL PANEL:

This air cooler uses multifunctional mechanical buttons. You can select the functions as follows:

1. Time-setting: this button includes ON, OFF, 30min, 60min, 90min, 120min. Under standby state, this button can

be rotated from 0 to 120 min. Once the time is set, the time starts to count down, then it switches off when it turns

to be "OFF". Set the button to "ON" when time setting is unnecessary.

2. Negative Ion: There is no negative ion function at the beginning when powered on. When the appliance is

working, by using this push-button users can switch on/off negative ion to purify air.

3. Oscillation: There is no left and right wind sweeping at the beginning when powered on. When the appliance is

working, by using this push-button users can enjoy left and right wind sweeping.

4. Cool wind: There is no "Cold Wind" function at the beginning when powered on. When the appliance is working,

by using this push-button users can switch on/off "Cold Wind" function. ATTENTION: The "Cold Wind" function

must be powered off when there is no water or water shortage in the water tank. This way is to avoid damaging

the water pump and assure its using span.

5. Wind speed: there are 4 speed levels: 0-stop, 1-low, 2-middle, 3-strong. Under standby state, the button can

be rotated 360 ° to select the wind speed type. The button should be set to "0" if users want to switch off the

appliance.

8. Wind speed switch

9. Handle

10. Rear frame

11. Net frame for filtration

12. Water tank

13. Water level limit knob

14. Power cord

NEGATIVE ION