Publicidad
Hose
Tuyau
Manguera
Removing Clogs
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢ ➢ Unplug vacuum.
➢ ➢ Pull open suction inlet cover and
➢ ➢ Disconnect wand from short hose
Suction
➢ ➢ Plug in vacuum cleaner and turn on.
Inlet Cover
Couvercle
de l'entrée
d'aspiration
➢ ➢ Disconnect wand and stretch hose in
Cubierta de
aspiración
➢ ➢ If clog still exists, turn vacuum
Short Hose
Tuyau court
Manguera
corta
➢ ➢ Turn vacuum over and inspect
- 40 -
check for clogging.
and check the wand and hose.
and out to remove clog.
cleaner OFF and UNPLUG POWER
CORD.
agitator area for clogs.
Publicidad
