Publicidad
Idiomas disponibles
Idiomas disponibles
Read all safety warnings, instructions, illustrations and specifications
provided with this power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1. Use and care
a. Use the correct tool for your applica-
tion. The correct tool will do the job
better and safer.
b. Protect the tool, particularly the area
around the camera and infrared lens,
against moisture and snow. The recep-
tion lens could fog up and distort the
measurements. Incorrect settings on the
tool and other atmospheric influences
may make the measurements inaccurate.
Objects could be depicted hotter or
colder, which may present a danger if
touched.
c. High temperature differences in a
thermal image may cause even high
temperatures to be shown in a color
associated with low temperatures.
Coming into contact with such an area
may cause burns.
d. Temperature measurements will only
be correct if the emissivity setting and
the emissivity of the object match. Ob-
jects could be depicted hotter or colder
in temperature and/or color, which may
present a danger if touched.
e. Do not use the tool if the switch does
not turn it on and off. Any tool that
cannot be controlled with the switch is
dangerous and must be repaired.
f. Store idle tool out of the reach of chil-
dren and do not allow persons unfamil-
iar with the tool or these instructions
to operate the tool. Tools are dangerous
in the hands of untrained users.
g. Maintain tools. Check for misalignment
or binding of moving parts, breakage of
parts and any other condition that may
affect the operation. If damaged, tool
repaired before use. Many accidents are
caused by poorly maintained tools.
General Safety Rules
h. Use the tool, accessories, etc., in ac-
2. Battery tool use and care
a. Recharge only with the charger speci-
b. Have the measuring tool serviced only
c. Do not use the measuring tool in explo-
d. Use tool only with specifically desig-
e. When battery pack is not in use, keep
f. Under abusive conditions, liquid may
SAVE THESE INSTRUCTIONS
-3-
cordance with these instructions and in
the manner intended for the particu-
lar type of tool, taking into account
the working conditions and the work
to be performed. Use of the tool for
operations different from those intended
could result in a hazardous situation.
fied by the manufacturer. A charger that
is suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
by a qualified specialist using only
original replacement parts. This will
ensure that the safety of the measuring
tool is maintained.
sive atmospheres which contain flam-
mable liquids, gases or dust. Sparks
may be produced inside the measuring
tool, which can ignite dust or fumes.
nated battery packs. Use of any other
battery packs may create a risk of injury
and fire.
it away from other metal objects like
paper clips, coins, keys, nails, screws,
or other small metal objects that can
make a connection from one terminal
to another. Shorting the battery termi-
nals together may cause burns or a fire.
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
Publicidad
