Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
www.trapp.com.br
Belt Tensioner Start
1
The motor should only be started when the belt tightening lever is in the (1) pressure relief position, i.e., not
stretching the belts, in this position turn the motor on and when it reaches its full speed, move the lever to
the belt tension position (2), always checking if the belts are tight and the lever has reached its end point,
operating the shredder. It is worth remembering that the belt lever can only be tensioned when the motor is
running at full speed, if the motor is turned on with the belts tensioned this could damage them.
2
49
Publicidad
Tabla de contenido
