Useful Suggestions - TRAPP TRP 30 Manual De Instrucciones

www.trapp.com.br
Combustion Engine - TRP 400G
In the first 5 hours
Change the oil of the crankcase
 
Every 8 hours or daily
Check the oil level
 
Clean the area around the muffler and the controls
 
Clean the protective screen
 
Every 25 hours or annually
Clean the air filter(*)
 
Clean the pre-purifier(*)
 
Every 50 hours o annually
Change the engine oil
 
Check the muffler and spark arrester
 
Annually
Replace the oil filter
 
Replace the pre-purifier
 
Replace the spark plug
 
Replace the fuel filter
 
Clean the air cooling system(*)
 
(*) In very dusty places or when particles brought by the air are present, clean more frequently.
Some problems may occur during the use of the shredder. Find some suggestions to solve them below:
Problema Causa Provável
Shredder
An excess of organic matter can
jamming
accumulate in the machine.
Low production 1. Insufficient feeding.
2. Machine
specification.
Irregular cut of
1. Cutting blades need sharpening .
the product
2. Worn counter cutting blade .
Periodic Maintenance Plan of

Useful Suggestions

revolution below
Solução
Unplug the shredder. Open the lid and remove the
excess material into the machine. Close the lid, turn
the machine on and allow it to reach the maximum
speed then restart the work, controlling the power to
the machine.
1. Maintain continuous feeding, yet not overfeeding
which may cause shredder to jam.
2. Check the rotation of the machine conforms to the
technical characteristics (pág. 45).
1. Sharpen cutting blades as indicated in "Sharpening
of cutting blades" (pg. 51).
2. Do as item "Counter cutting blade" (pg. 50).
57