Vortice NORDIK EVOLUTION R Serie Manual De Instrucciones página 8

ENGLISH
Installation
Figures: 4 - 21 (Fig.17: Light Kit).
WARNING! The anchoring devices shown in figures 6
are purely indicative. Respect the instructions given
below to install the appliance.
1.Check that the intended ceiling is structurally suited
to support the weight of the product.
2.Pay attention that the anchoring devices do not
jeopardize the structural strength of the intended
ceiling.
3.Use correctly tightened anchoring devices suited to
the weight of the product and to the type of the
ceiling. Make sure that these are of a type that
cannot be unscrewed by the rotation of the product.
Cleaning
Figures: 22 - 24.
Before cleaning the unit or carrying out maintenance
operations turn the main switch off and remove the
plug from the power supply.
Electrical Connections
Figures 25, 26 (Light Kit).
Disposal
This product complies with Directive 2012/19/EU on
the management of waste electrical and electronic
equipment (WEEE).
The crossed-out wheeled bin symbol on the applian-
ce indicates that, at the end of its life,
the product should not be discarded
together with household waste but
must be taken to a separate collec-
tion point for electrical and electronic
equipment. This will avoid negative
effects on the environment and
health, and will encourage correct tre-
atment, disposal and recycling of the materials from
which the product is made.
Contact the municipal authority for the location of
this type of facility. Alternatively, the distributor is
obliged to take back the appliance to be disposed of
free of charge in exchange for the purchase of an
equivalent appliance.
8
EC Declaration of Conformity
VORTICE ELETTROSOCIALI S.p.A
Strada Cerca, 2 - frazione di Zoate
20067 TRIBIANO (MI) – ITALY
declare that products in the following range:
NORDIK EVOLUTION R
conform with European Directives
2006/42/CE
according with the following:
EN 60204-1 (2006)
EN 12100-1 (2003)
EN 12100-2 (2003)
EN 13857 (2008)
2006/95/CE
according with the following:
EN 60335-1(2002) +A11(2004) +A1(2004)
+A12(2006) +A2(2006) +A13(2008)
EN 60335-2-80 (2003)+A1 (2004)+A2(2009)
EN 62233 (2008)
2004/108/CE
according with the following:
EN 55014–1(2006)
EN 55014-2(1997) +A1(2001)
EN 61000-3-2(2006)
EN 61000-3-3(2008)