Bestron DYL1600E Manual Del Usuario página 29

user's instructions
cleAninG And MAintenAnce - cleaning or replacing the motor safety filter
Clean or replace the motor safety filter at least twice a year, and more frequently if the filter is visibly
blocked.
1. Remove the plug from the wall socket.
2. Remove the hose from the vacuum cleaner.
3. Open the cover by pulling the cover release (dust bag) upwards.
Remove the dust bag, see Figure 10. Remove the motor safety filter
holder, located behind the dust bag: see Figure 11.
4. Dispose of the filter, or wash it in lukewarm water. Allow it to dry
thoroughly.
5. Return the cleaned or new filter to its holder, and fit the holder in the
appliance. Fit a dust bag. Close the cover, and press until it clicks into
place.
• Water could penetrate into the appliance if the filter is not thoroughly
dry. This could result in (electrical) damage.
• Make sure that the dust bag does not become pinched by the cover.
This could damage the appliance and/or the dust bag.
cleAninG And MAintenAnce - replacing the exhaust filter
Replace the exhaust filter at least twice a year, and more frequently
if the filter is visibly blocked.
1. Remove the plug from the wall socket.
2. Open the exhaust-filter cover by pulling on the lip on the cover.
Remove the exhaust filter from the appliance, see Figure 11.
3. Rinse the filter in lukewarm water. Allow it to dry thoroughly.
4. Return the cleaned filter to the appliance. Close the cover, and
press until it clicks into place.
Figure 12
• Water could penetrate into the appliance if the filter is not thoroughly dry. This could result in
(electrical) damage.
• The cover cannot be closed if a dust bag is not fitted, or is not fitted correctly.
• Make sure that the dust bag does not become pinched between the cover and the housing. This
could damage the appliance and/or the dust bag.
technicAl inforMAtion
Type:
Output:
Power supply:
Dust bag:
the enVironMent
• Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
• When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to
the symbols on the product, the user's instructions or the packaging.
• The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
• Contact your municipality for the address of the appropriate collection point in your neighbourhood.
DYL1600E
1600W max
230V ~ 50Hz
D00013
29
Figure 11