cecotec Bolero MiniCooling 4L Bora Manual De Instrucciones página 31

1. PARTS AND COMPONENTS
Fig. 1
1. Shelf
2. Drawer
3. AC power cable
4. DC power cable
5. Removable drip tray
Note:
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content:
- Mini fridge
- Instruction manual
3. OPERATION
- The mini fridge takes up to 12 hours to reach its optimum temperature upon first use. After
continuous use, the temperature dwell time will naturally decrease.
- To switch between cooling and heating, turn the mode switch to the Off position and wait
at least 30 minutes before switching to the other mode. Fig. 2
Fig. 2 key
1. Green indicator light: cooling mode enabled.
2. Red indicator light: heating mode enabled.
BOLERO MINICOOLING 4L BORA WHITE · BLACK · RED
ENGLISH
31