Hilti BX 3 Manual De Instrucciones Original página 10

Service
▶ Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
2.2 Tacker safety warnings
▶ Always assume that the tool contains fasteners. Careless handling of the fastening tool can result in
unexpected firing of nails causing personal injury.
▶ Do not point the tool towards yourself or anyone nearby. A nail will be ejected by the tool if it is
triggered unexpectedly, possibly leading to injury.
▶ Do not actuate the tool unless the tool is placed firmly against the workpiece. If the tool is not in
contact with the workpiece, the fastener may be deflected away from your target.
▶ Disconnect the tool from the power source when the fastener jams in the tool. While removing a
jammed fastener, the fastening tool may be accidentally activated if it is plugged in.
▶ Use caution while removing a jammed fastener. The mechanism may be under tension and the nail
may be forcefully ejected while attempting to free a jam.
▶ When fastening electrical cables, make sure the cables are not energized. Hold the fastening tool
only by insulated gripping surfaces. Use only fasteners designed for electrical cable installations.
Check that the fastener has not damaged the insulation of the electrical cable. A nail that damages
the insulation of electric cables can lead to electric shock and fire hazards.
2.3 Safety instructions
Basic information concerning safety
WARNING! Read all safety precautions and other instructions.
precautions and other instructions may result in electric shock, fire and/or serious injury.
Keep all safety precautions and instructions for future reference.
Requirements to be met by users
▶ Only authorized, appropriately trained persons may operate or service this tool.
Personal protective equipment
▶ You and any other persons in the vicinity must wear suitable eye protection and a hard hat while the tool
is in use.
▶ Wear ear protectors.
▶ Exposure to noise can cause hearing loss.
Personal safety
▶ Observe the information printed in the operating instructions concerning operation, care and maintenance.
▶ Stay alert, watch what you are doing and use common sense when operating a direct fastening tool.
Don't use the tool when you are tired or under the influence of drugs, alcohol or medication. Take a
break if you experience pain or feel unwell. A moment of inattention while operating tools may result in
serious personal injury.
▶ Avoid working in awkward body positions. Make sure you work from a safe stance and stay in balance
at all times.
▶ Wear non-skid shoes.
▶ Never pull the fastener guide or fastener back with your hand.
▶ Under certain circumstances, the tool could be made ready to fire by pulling the fastener guide or
the fastener back by hand. When the tool is ready to fire, fasteners or the piston could be driven
inadvertently into parts of the body.
▶ Keep the arms slightly bent while operating the tool (do not straighten the arms).
▶ Keep other people away from the working area, especially children.
Use and care of direct fastening tools
WARNING! Danger of fasteners penetrating right through. Before driving fasteners, check to make
sure that no one is present behind or below the object into which the fastener is to be driven.
▶ Before beginning the work, carry out a test by driving 2 fasteners into the material you are working on.
▶ Use the right tool for the work you are carrying out. Do not use the tool for purposes for which it was not
intended. Use it only as directed and when in faultless condition.
▶ Never leave a loaded tool unattended.
▶ Transport and store the tool in a secured toolbox.
4 English
Failure to observe the safety
2180112
*2180112*