HJM ENV396 Instrucciones De Uso página 36

Envasadora_Maquetación 1 07/07/16 12:15 Página 36
5. Once completed the indicator light will turn off; press the release
buttons on both sides of the machine, it is now safe to take out the
newly created bag.
6. The custom sized bag is now ready for vacuum sealing.
CAUTION: Make sure you give the appliance time to cool down. Wait
at least 20 seconds between seals. Under very heavy usage,
appliance will shut off automatically to prevent overheating. If it does,
wait 20 minutes to allow appliance to cool off.
HOW TO VACUUM SEAL WITH THE VACUUM BAGS
1. Place the item(s) to be sealed into the pre-cut or custom sized
bag. Leave at least 2 inches between the contents and the top of
the bag to allow for bag contraction.
2. Open lid and place the open end of the bag down into the Vacuum
Chamber.
3. Close lid firmly by pressing down firmly on both sides, check to
make sure that the lid will not open. If the lid can not be lifted, then
you have successfully locked the lid in place.
- 36 -