Care & Cleaning - HJM ENV396 Instrucciones De Uso

Envasadora_Maquetación 1 07/07/16 12:15 Página 37
4. To begin the vacuum process, press the "Vacuum & Seal" button.
The unit will continue to vacuum and then seal once air has been
removed.
5. Once the indicator light has turned off, press the release buttons
on both sides of the machine to release the bag.
HOW TO USE THE VACUUM SEALER WITH A
CANISTER
NOTE : Canister and hose are not included.
- Wipe canister cover, canister base and ensure they are clean and
dry.
- Place food into canister and leave at least one inch of space betwe-
en food and cover.
- Place cover onto canister, insert one end of the hose into port on
appliance. Put the other end into the port on canister cover; pres-
sing down firmly to ensure a tight fit.
- Close lid by pressing down on both sides. If the lid cannot be lifted,
then you have successfully locked the lid in place.
- To begin the vacuum process, press the ''Vacuum & Seal'' button.
The unit will continue to vacuum and then seal once air has been
removed.
- Once the indicator light has turned off, it is safe to remove the hose
from machine and canister.
CARE & CLEANING
- Always unplug the unit before cleaning.
- Do not immerse in water.
- Do not use abrasives to clean the unit.
- Wipe the outer surface with a soft, damp cloth and soap.
- To clean the inside of the unit, wipe away any food or liquid with a
paper towel.
- Dry all parts thoroughly before you plug in and operate the unit again.
- Vacuum chamber may trap liquids that were drawn from the bag ;
use a mild dish washing soap and a warm, damp cloth to wipe away
any left behind liquid from the vacuum chamber. Dry thoroughly.
- 37 -