cecotec BOLERO MINICOOLING 4L RIO Manual De Instrucciones página 32

ENGLISH
3. Mode switch:
Up: Cooling mode
Middle: Off
Down: Heating mode
4. DC connector
5. AC connector
Household socket
1. Place the mini fridge on a flat, stable surface.
2. Keep the mode switch in the Off position before connecting the mini fridge to a plug socket.
3. Plug the AC power-cable connector into the AC connector of the mini fridge.
4. Connect the appliance to the mains supply via the AC power-cable plug.
5. Set the mode switch to Cooling
Car plug socket
1. Place the mini fridge on a flat, stable surface.
Keep the mode switch in the Off position before connecting the mini fridge to the car plug
2.
socket.
3. Plug the DC power-cable connector into the DC connector of the mini fridge.
Connect the appliance to the car's plug socket via the DC power-cable plug.
4.
Set the mode switch to Cooling
5.
WARNING:
Do not leave the mini fridge running in the car with the engine switched off.
Cooling
- For faster cooling, store cold drinks in the mini fridge.
- Temperature depends on the environment.
- The colder the ambient temperature, the cooler the mini fridge will be. Ambient temperature
is the temperature of surrounding air. For example, if the appliance is used for cooling, the
item can be cooled down to 18 °C below ambient temperature: the appliance will thus keep
the item cool between 5 °C and 8 °C.
Heating
- The appliance is also designed to keep warm. It is not designed to directly heat up cold items
- After switching the mini fridge off, hot items will maintain their temperature for several
hours, provided the door is properly closed. Temperature dwell time will vary depending
on environmental conditions.
- Take care to avoid burns during use of the mini fridge in Heating mode.
32
BOLERO MINICOOLING 4L RIO WHITE · BLACK · RED · CREAM
or Heating mode
or Heating mode
.
.