Hilti SFL 14-A Manual Del Usuario página 8

Note
If the battery charge state LEDs blink, please refer to the information
given in the Troubleshooting section.
4 Technical data
SFL 14­A
Voltage 14.4 V
5 Operation
5.1 Inserting the battery
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals
and the contacts on the product are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the product so that
it cannot drop out and fall, thereby presenting a hazard to other
persons.
▶ Fit the battery and check that the battery is securely seated in the
appliance.
5.2 Removing the battery
SFL 14­A
1. Press the release button at the rear of the battery.
2. Pull the battery out of the product to the rear.
5.3 Removing the battery
SFL 18­A
1. Press both release buttons.
2. Pull the battery out of the product to the rear.
4
SFL 18­A
21.6 V
2
3
SFL 36­A
36.0 V