Uebler X21 nano Instrucciones De Uso Y Montaje página 10

Basisträger_hoch.fm Seite 2 Dienstag, 8. März 2011 10:30 10
Folding open the bicycle rack
1
1. Take the bicycle rack (2) out of the bag (1).
6
2. Open the quick release clamp (6).
3. Fold up the rack frame (7) and close the quick release
clamp (6). If necessary, turn the quick release clamp (6)
clockwise if the rack frame (7) is too loose.
Note
If the quick release clamps cannot be closed, turn anticlockwise.
8
4. Fold out the wheel rails (8) and engage.
2
M+P-25A-0036
7
6
M+P-25A-0037
8
M+P-25A-0038
- 2 -
9
5. Fold out the tail lamps (9) and engage.
6. Swing the brackets (10 and 11) forward and slide along the rack
frame (7) into the required position.
Attention
The plate number on the bicycle rack must match the plate
number of the vehicle and be clearly legible.
14
15
7. Insert the number plate in the number plate holder (14). Turn
the locking pin (15) by 180° using a screw driver to prevent the
number plate from slipping.
Note
To insert higher number plates, press the stoppers (arrows)
back and slide the plate into the number plate holder.
Collapsing the bicycle rack
The bicycle rack (2) is collapsed in reverse order.
10
11
7
M+P-25A-0039
M+P-25A-0040