Melchioni Family ISABEL Manual De Instrucciones página 17

respectively 180 ° C and 15 min.
At this point it is possible to adjust the time and temperature freely using the Time +/- and Temperature +/- adjustment
buttons.
You can also press any of the pre-set programs to cook different foods.

By pressing any of the pre-set cooking buttons, the lights will flash, then press the start button
begin to cook. Each program has its own time and temperature set by default (as shown in the table). The consumer can
freely adjust the time and temperature using the Time +/- and Temperature buttons +/-.
a) The temperature adjustment range is between 50 and 200 ° C. By pressing the Temperature +/- button it is possible to
increase or decrease by 10 ° C. Once at 200 ° C, by pressing the "+" key once the temperature will return to 50 ° C, by
pressing the "-" key again it will return to 200 ° C. During the temperature adjustment process, the temperature will
flash on the display (it does not flash during operation), and after 3 flashes the temperature is confirmed.
b) The time adjustment range is from 1 to 60 minutes. By pressing the Time +/- button it is possible to increase or
decrease by 1 minute. When you reach 60 minutes, pressing the "+" button once will return the time to 1 minute,
pressing the "-" button again will return to 60 minutes. During the time adjustment process, the time will flash on the
display (it does not flash during operation), and after 3 flashes the time is confirmed.
3. Start, pause / stop
After selecting the desired program, time and temperature, press the button
The icon will start flashing, a BEEP will be heard and the appliance will start to work.
If during operation you want to interrupt cooking, press the button
icon will stop blinking.
If during operation you want to turn off the appliance, press the button
and will return to standby mode.
Notes:
a) It is possible to interrupt cooking at any time to mix the ingredients or add others simply by removing the drawer from
its seat. The appliance will resume operation by reinserting the drawer in the compartment.
b) Disconnecting the appliance from the power supply during operation, the cooking process will be interrupted and all
the lights will turn off. The appliance will resume working by reconnecting it to the power outlet.
c) During operation, six red lights come on for the heating element. When the six red lights flash one at a time in
sequence, it means the heating element is working. As soon as the appliance reaches the set temperature, the heating
element stops working and the six red lights will stop flashing.
4. End of the set program
The heating element stops working when the appliance reaches the set time. The display shows 00 min, the motor continues to
run and a BEEP is heard. The engine continues to run for another 1 minute, the appliance will begin to cool and will go into standby
mode.
to start cooking.
, you hear a BEEP, the device will stop working and the
, you hear a BEEP, the appliance will stop working
16
e
the appliance will