Descargar Imprimir esta página

Stihl MSA 220 C-B Manual De Instrucciones página 78

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 130
English
19 Specifications
19.1 STIHL MSA 220 C Chainsaw
– Approved batteries:
– STIHL AP
– STIHL AR
– Weight without battery, guide bar and saw chain 2.9 kg
– Max. oil tank capacity: 210 cc (0.21 l)
For battery life see www.stihl.com/battery-life.
19.2 Chain Sprockets and Chain Speeds
The following chain sprockets may be used:
– 6-tooth for 3/8" P
– Maximum chain speed according to ISO 11681:
23.3 m/s
– 7-tooth for 1/4"
– Maximum chain speed according to ISO 11681:
18.5 m/s
19.3 Minimum Groove Depth of Guide Bars
The minimum groove depth depends on the pitch of the
guide bar.
– 3/8" P: 5 mm
– 1/4" 4 mm
19.4 STIHL AP battery
– Battery Technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
76
– Permissible temperature range for operation and storage:
-10°C to +50°C
19.5 Noise and Vibration Data
K-value (uncertainty) for sound pressure level is 2 dB(A). K-
value (uncertainty) for sound power level is 2 dB(A). K-value
(uncertainty) for vibration level is 2 m/s².
MSA 220 C 3/8" P
– Sound pressure level L
pA
EN 60745 - 2 - 13: 89 dB(A)
– Sound power level L
measured according to EN 60745-
wA
2-13: 100 dB(A)
– Vibration level a
measured according to EN 60745-2-13
hv
– Control handle: 3.6 m/s²
– Front handle: 4.8 m/s²
MSA 220 C 1/4"
– Sound pressure level L
pA
EN 60745 - 2 - 13: 89 dB(A)
– Sound power level L
measured according to EN 60745-
wA
2-13: 100 dB(A)
– Vibration level a
measured according to EN 60745-2-13
hv
– Control handle: 6.3 m/s²
– Front handle: 6.0 m/s²
The vibration values quoted above have been measured
according to a standardized test procedure and may be used
to compare electric power tools. Depending on the type of
usage, the vibrations that actually occur may differ from the
values quoted. The vibration values quoted may be used for
an initial assessment of the user's exposure to vibrations.
The actual exposure to vibrations has to be estimated. This
process may also take into account times during which the
electric power tool is switched off and times during which it
is switched on but running off load.
Information on compliance with Vibration Directive
2002/44/EC is available at www.stihl.com/vib.
19 Specifications
measured according to
measured according to
0458-795-9921-A

Publicidad

loading

Este manual también es adecuado para:

Msa 220 c