Craftsman 247.282820 Manual Del Operador página 10

Bail Interlock
ThrottleControl
/
Choke
Control
BladeControl
Oil Fill Bail
l RecoilStarter
Gasoline
Cap
HeightAdjustment
Lever
Figure6
CHOKE CONTROL
Activatingthe choke control closes the choke plate on carburetor
and aids in starting engine.
THROTTLE CONTROL
The throttle control is located on the engine, it regulates the speed
of the engine (Rabbit being the fastest, Turtle being the slowest) and
willshut off the engine when pushed to the STOP position.
RECOIL STARTER
The starterhandleis usedto start theengine,
GASOLINE CAP
Removethegas cap to add fuel.
OIL FILL
Engineoil levelcan be checkedand oil addedthroughthe oil fill.
BLADE CONTROL BAIL
Locatedon the upperhandle,the bladecontrolhandleis usedto
engageand disengagedriveto the cutting blades.Squeezethe
controlhandleagainstthe upper handleto engagetheblades;
releaseit to disengage.
HEIGHT ADJUSTMENT LEVER
The heightadjustmentleverraisesand lowersthe cuttingblades.
Use the 1-settingfor transportation,settings2 through5 for
dethatching. S ettings3, 4, and 5 are not neededuntilthe bladesare
too wornto be effectiveon setting2. Optimumcuttingdepthis 1/8 of
an inch.
BAIL INTERLOCK
The bail interlocklocksthe bladecontrol handlein placeto prevent
unwantedengagingof the cuttingblades.
10