Craftsman 247.282820 Manual Del Operador página 8

NOTE:References to rightor left sideof thedethatcherare
determined from behindtheunit in the operatingposition(standing
directlybehindthedethatcher,facingthe handlepanel).
REMOVING FROM CARTON
1. Cut the cornersof the cartonand lay the sidesflat on the
ground.Removeand discardall packinginserts.
2. Movethe dethatcherout of the carton.
3. Makecertain the cartonhas beencompletelyemptiedbefore
discardingit.
ASSEMBLY
Positioning the Handle
1. Removeknobsfrom handles.
2. Placelowerhandleas shown.See Figure1.
4. Placeupperhandleon lowerhandle.
5. Insertknobs intotop hole of the lowerhandleand bottomhole
of the upperhandleand tighten.See Figure2.
Figure2
Attaching Remote Pulley Starter
The ropeguide isattachedto the rightsideof the upper handle.
Loosenthe nut whichsecuresitto the upperhandle.See Figure3.
f
Figure1
Insertknobs intothe top notchof the baseof the dethatcher
and bottomhole of the handleand tighten.
Figure3
a. Holdthe bladecontrol bail againstthe upperhandle.
b. Slowlypull starterrope out of engine.
c. Slip starterrope intothe ropeguide.
d. Tightenrope guidenut.
J
8