Publicidad
REMOVE ALL THE PARTS OF YOUR CYCLE FROM THE CARTON AND PLACE THEM ON THE FLOOR
CAREFULLY.
ASSEMBLING YOUR CYCLE IS SIMPLE.
FOLLOW THESE INSTRUCTIONS CAREFULLY AND IT SHOULD TAKE YOU AROUND 15-20 MINUTES.
ASSEMBLY INSTRUCTION
1. ATTACH THE STABILIZERS
Attach the front stabilizer (45) with 2 leveling caps (44) to the front curve bracket of main
frame (1) and secure, using 2 carriage bolts (46), 2 curve washers (69) and 2 cap nuts (43).
Attach the rear stabilizer (2) with 2 round end caps (3) to the main frame (1) and secure,
using 4 Machine screws (5).
NOTE: Make sure you fasten the bolts securely to avoid shaking and discomfort when
cycling.
GENERAL
2
2
Publicidad
