Publicidad
Idiomas disponibles
Idiomas disponibles
6.7. PEAK HOLDING
PURPOSE
Sensing and saving the max weight during weighing, hold and display it
INSTANCE
Set 10 seconds for the dynamic weight material or variable weight material.
KEY (ORDER)
Press and Hold
[MENU] Key
Short Press [CAL] Key
Short Press [MENU]
Key six times
Short Press [CAL] Key
Short Press [CAL] Key
86
MODE INSTANCE OF PRESSING KEY TO RECORD
STEP EXPLANATION
1. Enter Into Menu System
2. Display counting menu
3. Enter Into Dynamic Measurement
The signal hash on the upper left of window
4. Display CNT Menu
5. Enter into CNT mode of pressing key
•
Three position to display as:
Upper left display the present weight, Upper right display
the number of weighing, Main window displays the max
weighing weight.
6. Put sample on pan and press [CAL] key to confirm it
•
Three position to display as (Example: 10g):
Upper left display the present weight 10g, Upper right
display the number of weighing: 1, Main window displays
the max weighing weight: 10g
7. Put samples on pan several times and press [CAL] key each
time.
•
Three position to display as (Example: put three times
with lOg, 18g and 15g): Upper left display the pre-
sent weight 15g, Upper right display the number of
weighing:2, Main window displays the max weighing
weight: 18g
•
The machine can operate 9999 times under Peak Holding
mode
USER'S MANUAL ABS
LCD SCREEN DIS-
MENU LEVEL
PLAY
AND CODE
--node-
1 .
-COUNT-
1 .1 .
--PEAK-
1 .7.
REr
CNT
1 .7.1
EN
Publicidad
