Publicidad
Idiomas disponibles
Idiomas disponibles
4
5
6
7
Select
the duration
for the timer-activated
period
with JOG DIAL and press
ENTER.
SETTING THE SLEEP TIMER
The duration for the timer-activated
period can be set
between 5 and 120 minutes in 5-minute ste~s.
Adjust
the volume
with JOG DIAL and press
1
ENTER.
2
The volume level is adjusted from O to 20,
Prepare
the source.
To listen to a CD, load a CD.
To listen to an MD, insert an MD.
To listen to the radio, tune in a station.
To record from the radio, tune in a station and insert
an MD.
Press
POWER
to turn the unit off.
@ remains on the display after the power is turned off
(timer-standby
mode).
When the timer-on time is reached, the unit turns on.
Press
SLEEP.
Within
4 seconds,
turn JOG DIAL to specify
the
time until the power
is turned
off.
The time changes between 5 to 120 minutes in 5-minute
steps.
Specified time
SLEEP
To check the time remaining
until the power is turned off
Press SLEEP once. The remaining time is displayed for 4
seconds.
To cancel the sleep timer
Press SLEEP twice so that SLEEP OFF is displayed.
u
To check or change the specified
items
m
Press TIMER on the remote control then press ENTER
During operation
M
and M
are also available instead of
within 4 seconds.
Each time ENTER is pressed, each item is
displayed.
JOG DIAL.
If you want to change the specified items, press f++
or W.
To cancel timer standby mode temporarily
Press TIMER repeatedly
so that TIMER OFF is displayed.
To use the unit in timer standby mode
You can use the unit normally.
Before turning the unit off, repeat step 6 to prepare the
source.
MD < REC TIME is displayed
when:
The duration for the timer-activated
period is longer than the
remaining recordable
time of the MD.
o If the unit is left for one minute at steps 2 and 5, the timer
setting mode is canceled.
o Timer play and timer recording will not begin unless the
power is turned off.
e During operation
H
and Fbf
are also available instead
of JOG DIAL.
ENGLISH 23
Publicidad
