Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning lock function
Cleaning the control panel while the hob is switched on may
change the settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
symbol. A signal sounds. The
"
along with the
symbol. The control panel is locked for
"
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The
heat indicator
/
flash alternately in the display.
œ
•
Displaying energy consumption
This function displays total energy consumption for the time the
hob has been switched on.
After switching off the hob, the consumption in kWh is
displayed for 10 seconds.
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator
Function
Childproof lock
™‚
‹
Deactivated.*
Activated.
‚
Audible signals
™ƒ
Confirmation and error signals deactivated.
‹
‚
Only error signal activated.
Only confirmation signal activated.
ƒ
„
All signals activated.*
Display energy consumption
™„
‹
Deactivated.*
Activated.
‚
*Factory settings
indicator lights up
Ú
,
symbol and the residual
"
‰
35 seconds. The control panel surface can now be cleaned
without the risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
An example is shown in the image with a consumption of
‚
.
‹‰
kWh.
The Basic Settings chapter provides information on activating
this function.
27
Publicidad
