OHAUS Adventurer AX4201/E Manual Del Usuario página 6

Interface connections on the rear of the
balance:
USB
USB1: Used to connect to PC only
USB2: Used to connect to a USB flash driver only
RS232: Used to connect to PC or Printer
3.5 Initial Calibration
For best results, the instrument's calibration should be checked prior to first use. If
adjustment is needed, refer to the Calibration section of the instruction manual.
4. OPERATION
4.1 Overview of Display, Home Screen
This equipment utilizes a touch-sensitive display. Touch areas and Buttons to control
the equipment's functions.
CONTROLS
Button Action
User logout button
Short Press (if powered Off): Turns on the scale
Long Press (if powered On): Turns off the scale
Note: The balance will automatically power on when power is
connected.
Short Press: Prints the present data to a printer or a computer.
Short Press: Perform Zero operation
Short Press: Perform Calibration operation
Short Press: Perform Tare operation
RS232
USB connection on the front of the balance:
EN-5