Publicidad
Idiomas disponibles
Idiomas disponibles
REV MODE
~-.. i..... ________
.._____
—-—-- .—.————
- \'
(DECK 2) ~~
On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
" USe Type I (normal), Type
II
(high/CrOz) or Type Iv (metal)
tapes for playback.
1
2
3
PressTAPE
DECK 1/2 and press A PUSH EJECT
to
open the cassette
holder.
=PUSH
EJEC
-F
Insert a tape with the exposed side down, Push the cassette
holder to close.
Press DOLBY NR and turn Dolby NR on or off to
match the playback tape.
Press <›
to start play.
The tape counter indicates the
Playing deck number
tape running length.
To select a reverse mode (deck 2 only)
Each time REV MODE (DECK2) is pressed, the reverse mode
changes.
.4
.,+<.,
To play one side only, select 1.
To play from front side to reverse side once only, select Z).
To play both sides repeatedly, select (1).
When tapes are loaded in both decks, =) on the display
indicates Continuous Play,
To select a playing deck
When tapes are loaded in both decks, press TAPE DECK 1/2
first to select a deck.
The selected deck number is displayed,
To stop play, press
.
To pause play (deck 2 only), press II, To resume play, press
again.
To change the playback side, press 4 E in play or pause mode.
To fast forward or rewind, press -
or -.
Then press
to
stop the tape.
To start play when the power is off (Direct Play Function)
Press TAPE DECK 1/2. The power is turned on and play of the
inserted tape begins.
To set the tape counter to 0000
Press
CLEAR in stop mode.
The counter is also set to 0000 when the cassette holder is
opened and closed.
Playback side indicator
>:
The front side is being
played
(forward).
+:
The back side is being played (reverse).
16
ENGLISH
Publicidad
