Descargar Imprimir esta página

Aiwa NSX-MA945 Manual De Instrucciones página 18

Publicidad

Idiomas disponibles

Idiomas disponibles

To ~lav one disc only, prsss DISC DIRECT PLAY 1-3.
The selected disc is played once.
MULTI JOG —
.
— -=...,
B
~o-%+lo
DISC
DIRECT
PLAY
Press CD, then press A OPEN/CLOSE
to open the
disc compartment.
Load disc(s) with the label side
up.
~,
place the discs on tray 1 and 2.
To dav three discs, press DISC CHANGE to rotate the trays
after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing A OPEN/CLOSE.
Tray 1
Tray number of the
disc to be played
Total playing time
Total number of tracks
PLAYING DISCS
Load discs.
~,
press +>.
Play begins with the disc on tray 1.
Number of track being played
Elapsed playing time
To play with the remote control
Press DISC DIRECT PLAY, then press numbered buttons 1-3
within 3 seconds to select a disc.
To stop play, press
.
To pause play, press 1I. To resume play, press again.
To search for a particular point during playback, keep 44
or -
pressed and release it at the desired point.
To skip to the beginning of a track during playback, press
-
or -
repeatedly or turn MULTI JOG.
To rsmove discs, press A OPEN/CLOSE.
To start play when the power is off (Direct Play Function)
Press CD. The power is turned on and play of the loaded disc(s)
begins.
When A OPEN/CLOSE is pressed, the power is also turned on
and the disc compartment is opened.
To check the remaining time
During play, press CD EDIT/CHECK.
The amount of time
remaining until all tracks finish playing is displayed. To restore
the playing time display, repeat the above.
Selecting a track with the remote control
1
2
Press DISC DIRECT PLAY, then press numbered buttons
1-
3 within 3 seconds to select a disc,
Press numbered buttons O-9 and +1O to select a track.
Example:
To select the 25th track, press +1O, +1O and 5.
To select the 10th track, press +1O and O.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting
play,
1 Press DISC CHANGE.
2 Remove the discs and replace with other discs.
3 Press A OPEN/CLOSE to close the disc compartment.
When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the tray.
Do not place more than one compact disc on one disc tray.
. Do not tilt the unit with discs loaded.
Doing so may cause
malfunctions.
Do not use irregular shape CDs (example: heart-shaped,
octagonal ones). It may result in malfunctions.
18
ENGLISH

Publicidad

loading