Descargar Imprimir esta página

Aiwa NSX-MA945 Manual De Instrucciones página 31

Publicidad

Idiomas disponibles

Idiomas disponibles

5.1 CH INPUT jacks of this unit support the DOLBY DIGITAL
SURROPUND system.
Connect a DVD player with 5.1 CH output jacks to this unit using
cables with RCA phono plugs as follows;
llVD player's jack
This unit's jack
5.1 CH OUTPUT SUB WOOFER, etc. 5.1 CH SUB WOOFER
5.1 CH OUTPUT CENTER, etc.
5.ICH CENTER
5.1CHOUTPUTSURROUND (L,R),etc.
5,1CHSURROUND (L,R)
5.1 CH OUTPUT FRONT (L, R), etc.
5.1 CH FRONT (L,R)
LINE OUT (L, R), etc.
VI DEO/AUX
(See m.)
m
If the DVD is not connected to VI DEO/AUX jack of this unit;
- the spectrum analyzer dose not show the sound level of the
DVD player.
- the sound from the connected DVD player cannot be recorded.
To remove these limitations, connect the LINE OUT jacks of the
DVD player to VIDEO/AUX jacks of this unit besides connecting
to !5.1CH INPUT jacks. The signals through VIDEO/AUX jacks
enable the spectrum analyzer to work and the recording to be
done.
Refer also to the operating Instructions of the DVD player.
DOLBY DIGITAL SURROUND sound cannot be recorded in
any way.
SURROUND SOUND
*
A
. . . . . ......... ___
—–––
..... .—. –.—
1
MANIJAL
SELECT
~~WN,
-UP
When a DVD player is connected to the 5.1 CH INPUT jacks of
this unit, you can listen to DOLBY DIGITAL SURROIJND sound,
which enables you to enjoy theater-quality sound in your home
1 Press VIDEO/AUX/5.11 CH repeatedly until "5.1 ch
IN" is displayed.
2 Start playing DOLBY DIGITAL SURROUIND
salundl
on the
DVD player.
The DOLBY PRO LOGIC, BBE and the SURFIOUND ar<?
automatically canceled when the 5.1 CH is select[?d.
Make sure the software pla[yed back with the connected DVE~
player support the DOLBY DIGITAL SURROUND.
The function is changed from the 5.1 Ct+ to the VIDEO when;
m
- the headphones are plugged in.
- the MIC or ECHO level is changed.
- the Rhythm play function,
the SURROUND
system, the
DOLBY PRO LOGIC or the Karaoke function is turned on.
To adjust the sound levels of the center ancl surrouncl
speakers in DOLBY DIGITAL SURRO(JND
1
2
3
4
Press Vi DEO/AUX/5.l CH repeatedly
until "51 ch IN" is
displayed.
Press MANUAL SELECT repeatedly.
Speaker names appear irl turn as follows;
L/R (Speaker balance) —
CEN: Center speaker
t
i
S-W: Sub woofer
S-L: Left surround speaker
t S-R: Righl surround speaker J
Press U
DOWN or X
UP to adjust the sound level whila
"CEN", "S-L', "S-R" or "S-VW is displayed.
Each level can be adjusted between -8dB and +7dB.
Repeat steps 2 and 3 to adjust each speaker's sound level.
m
If the surround speakers or the center speaker level of the DOLBY
DIGITAL SURROUND
i~ clhanged, that of the SURRC)UND
system (page 14) and the DOLBY PRO LOGIC (page 24) is also
changed.
ENGLISH 3
"1

Publicidad

loading