Sony KP-41T65 Manual De Instrucciones página 28

Choose To
ON Listen to the sound from the
projection TV.
OFF Turn off the projection TV speaker
sound and listen to the projection
TV's sound solely through the audio
system speakers.
Turn off the projection TV speaker
sound and listen to the projection
TV's sound through the Sony SAVA
series speaker system. You can adjust
volume, muting, surround modes,
and super woofer mode with the
remote control supplied with the
projection TV.
SAVA SP
a
To select surround sound or super
woofer mode of the SAVA speaker
system
After setting SPEAKER to SAVA SP, follow the
procedure below.
Press ¢ or + to select SURROUND MODE or
SUPER WOOFER MODE, and press ">.
For details on each option, refer to the operating
instructions of the speaker system.
@ |AUDIO
pe
®
et
MTS STEREO
SPEAKER : SAVA SP
SURROUND MODE
SUPER WOOFER MODE
ge
Use Exit
Note
¢ This feature is only for Sony SAVA speaker system with an
operation capability for KP-41T65, KP-41T65C, KP-46C65,
KP-48S65, KP-53S65, KP-53S65C, KP-61565, and KP-61565C.
28-EN | Operations
Setting audio out
(AUDIO OUT)
You can change AUDIO OUT to VARIABLE or FIXED
when SPEAKER is set to OFF.
AUDIO OUT is variable when SPEAKER is set to ON.
1 Press MENU.
2 Press ¢ or + to select 2, and press (>.
3 Press ¢ or + to select AUDIO OUT, and press
Zar
4 Press ¢ or 4 to select VARIABLE or FIXED,
and press (©).
smaeifeomse
EFFECT: SURROUND
MTS: STEREO
SPEAKER : OFF
AUDIO OUT : VARIABLE
VARIABLE: Sound output varied according to the
projection-TV settings. You can adjust
7 : the volume, bass, treble, and balance.
FIXED: Sound output is always fixed toa certain
level. The volume, bass, treble, and balance
are also fixed to the factory settings.
5 Press MENU to return to the original screen.
Note
¢ If AUDIO OUT appears in gray, set SPEAKER to OFF.