Descargar Imprimir esta página

DeWalt DCS372KA Manual De Instrucciones página 13

Sierra circular inalámbrica de 18 v 140 mm (5,5 pulg.) para corte de metal

Publicidad

Idiomas disponibles

Idiomas disponibles

be kept away from charger cavities. Always unplug the charger
from the power supply when there is no battery pack in the cavity.
Unplug charger before attempting to clean.
6. Do not freeze or immerse charger in water or any other liquid.
WARNING: Shock hazard. Don't allow any liquid to get inside
charger. Electric shock may result.
WARNING: Burn hazard. Never attempt to open the battery pack
for any reason. If the plastic housing of the battery pack breaks or
cracks, return to a service center for recycling.
Storage Recommendations
1. The best storage place is one that is cool and dry away from direct
sunlight and excess heat or cold.
2. For long storage, it is recommended to store a fully charged
battery pack in a cool dry place out of the charger for optimal
results.
NOTE: Battery packs should not be stored completely depleted of
charge. The battery pack will need to be recharged before use.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
COMPONENTS (Fig. 2)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Trigger switch
B. Trigger switch lock-off button
C. Depth adjustment lever
D. Blade lock button
E. Kerf indicator
F. Blade clamping screw
G. Lower guard
H. Lower guard retracting lever
I. Battery pack
J. Sight window
K. Shoe
L. Blade wrench
M. Battery release buttons
FIG. 2
M
E
C
J
K
D
11
B
A
D
E
L
M
I
H
F
G

Publicidad

loading

Este manual también es adecuado para:

Dcs372Dcs372b