Publicidad
Idiomas disponibles
Idiomas disponibles
still a slight risk of accident or injury when handling the product. Caution and
common sense are advised when using the product.
WARNING: It is forbidden to use this product in cars, caravans,
truck, tents etc.
3. Instructions for use
The device is designed to generate heat for heating buildings and water by burning pellets. It is
suitable for permanent installation in buildings, however, it is not suitable for use in
prefabricated houses.
IMPORTANT: the product is designed to burn only wood pellets, do not use other types of pellets
and wood. We recommend using pellets that meet (or exceed) the following standards:
Moisture
according to CEN/TS 14774-1 and ISO 687
Ash content (after combustion) according to
ISO 1171
Volatile matter content (dry, ashless base)
according to ISO 562
Hydrogen
according to ISO 609
Carbon
according to ISO 609
Sulfur content (after combustion) according
to ISO 351 and ISO 334
Calorific value according to ISO 1928
Diameter
Length
Use of moist and/or contaminated pellets (e.g. high salt or sand content) will worsen the operation
and performance of the unit. Also, improper storage of pellets affects their efficiency, especially
when they are not kept in a dry room and/or their structure is damaged.
The user is responsible for any damage resulting from misuse.
content
(after
combustion)
content
(after
combustion)
content
(after
combustion)
EN
≤12%
≤0.7% (without bark)
≤2.0% (with bark)
80% to 88%
5.0% to 6.5%
40% to 50%
≤0.1%
16,900 KJ/kg to 19,500
KJ/kg
6-7 mm
≤30 mm
Publicidad
