MSW Motor Technics MSW-PLT-W20 Manual De Instrucciones página 30

1. Pressure relief valve
2. Expansion tank
3. Control main board
4. Water tank outlet
5. Water pump
6. Water intake
7. Water outlet
8. Air inlet pipe
9. Exhaust gas outlet pipe
10. Auger motor
11. Control panel
12. Tank cover
13. Igniter
14. Smoke temperature sensor
15. Exhaust fan
16. Water tank inlet
17. Bleed valve
18. Hopper
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not exceed 85%.
Place the unit in a way that ensures good air circulation. Maintain the minimum recommended
distance from each wall of the unit. Keep the device away from any flammable materials or objects.
Always operate the unit on a level, stable, clean, fireproof and dry surface and out of the reach of
EN