Uline H-2503 Instrucciones De Ensamble

H-2503, H-2504
UTILITY CART
TOOL NEEDED
Phillips Screwdriver
Rigid Caster x 2 Swivel Caster x 2
1. Screw legs into the top of the bottom shelf using four
screws. (See Figure 1)
2. Flip bottom shelf over and screw legs into underside
of top shelf using four screws. (See Figure 2)
PAGE 1 OF 3
1-800-295-5510
uline.com
PARTS
Leg x 4
Screw x 24
ASSEMBLY INSTRUCTIONS
3. Screw the casters into the underside of the bottom
Figure 1
Figure 2
Pour le français, consulter la page 3.
Top Shelf x 1
shelf using sixteen screws. (See Figure 3)
NOTE: Swivel casters can be installed at either
end of the cart. It is recommended that rigid
casters be installed at the front of the cart and
swivel casters at the rear.
Figure 3
Para Español, vea página 2.
Bottom Shelf x 1
1223 IH-2503