Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Plug the appliance into an appropriate
electrical outlet. Turn on the appliance by
pressing the main power switch. A beep sound
will be heard, and at the meantime the room
temperature shows in the display. Press ON/
OFF button, the heater is turn on.
1. Power setting. Press power setting button
to choose your desired power, low head is on
display: behalf of low heating; the hight head is
on display , behalf of high heating.
2. Temperature setting. Press temperature "+"
setting button or temperature "-" to set the
desired temperature from 16ºCto 40ºC. When
it reach you set your desired temperature, it
will flash a few seconds, and then shows in
the display.
3. Time setting. Press timer button set the
desired working time from 0h to 24h. The set
working time will flash a few seconds, and
then shows the set temperature again. The
appliance will shut itself off automatically when
the time is up.
4. Child lock. Long press the child lock button
until a beep sound is heard, the child lock
function is activated.
Long press the child lock button again until a
beep sound is heard, the child lock function
is cancel.
5. Turn off. Press ON/OFF button again to turn
off the appliance. Then, turn off the main power
switch and unplug the appliance.
SAFETY SYSTEM
- The appliance has a safety system which
automatically switches off the unit when
overheated.
- If overheating occurs, switch off the applian-
ce, remove the plug from the socket, and let it
cool down for at least 30 minutes. Put the plug
in the socket and switch on the heater.
CONNECTION BY WIFI
1.Use your phone to scan the QR code below
or search "Tuya Smart" in
Application on market to download and install
the App.
2.Select your country code, enter the cellphone
number and tap "Get" to get a message
containing verification on code.
3.Enter the verification on code in the message and
tap"Login" to login the App.
4.Switch on the product and make sure the product
is in WIFI covered environment. The indicator light
will rapidly blinks. If the indicator light do no rapidly
blinks, please press " " button for 5 seconds and the
product will have "bi" sound, then go to the App,
tap "add device" at the bottom, as shown in the
picture 1.
EN
www.garsaco.com | 17
Publicidad
