Carrier TC-IR-LB Manual Del Usuario página 2

To achieve better comfort, it is possible
to control the comfort temperature
when the status of the room is occupied.
To set the comfort temperature
Press the Temperature button .
■
Press to increase the temperature.
■
Press to decrease the temperature.
■
Note: Comfort temperature can be
adjusted only when the status of the room
is occupied.
Unoccupied: Fan speed is adjusted
automatically.
Occupied: Fan speed is adjusted
automatically to achieve optimum
comfort OR set manually.
To set the fan speed
Press the Fan speed button
■
Press or
■
On 1: Low speed
On 2: Medium speed
On 3: High speed
Automatic: Fan speed is
adjusted automatically to
provide optimum comfort
OFF: Fan OFF
To optimise energy efficiency of the
building while preserving its occupants'
comfort, the controller is scheduled
according to occupancy hours.
Press the Occupancy button to change
■
the occupancy status of the room.
Occupied room
Unoccupied room
2
Comfort Temperature
Fan Speed
.
to adjust the fan speed.
Occupancy
The comfort temperature is adjusted in
steps and its display depends on
installation configuration.
- Numerical: -3 / -2 / -1 / 0 / 1 / 2 / 3
- Bar graph:
Example:
Comfort temp.
step -1
Example:
Fan speed: Medium
Note: Fan speed can be adjusted only
when the status of the room is occupied.
Occupied
Comfort temp.
step ++
Fan speed: High
Unoccupied