Carrier TC-IR-LB Manual Del Usuario página 3

Pressing the Lighting button
the light icon on the screen.
To set the lights
Press the Lighting button
■
Press repeatedly to select the
■
lighting group.
Once the lighting group is selected,
■
press to turn the selected lights on
or press to turn the lights off.
Note: If your installation uses gradual
lighting, these buttons can be used
to increase and decrease your indoor
lighting.
Pressing the Blinds button
the blinds icon on the screen.
To adjust the position of blinds
Press the Blinds button
■
Press repeatedly to select the
■
blinds group.
Once the blinds group is selected,
■
press to raise or
selected blinds.
Press or once again to stop
■
blinds raising/lowering.
Optional
Depending on configuration and the type
of blinds, you might be able to control the
tilt mechanism.
Lighting Control
Example:
displays
Selecting one zone (zone number
displayed).
.
Selecting all zones (1-x means that all
lighting groups will be managed at the
same time).
Blinds Control
Example:
displays
Selecting one zone (zone number
displayed).
.
to lower the
Selecting all zones (1-x means that all
blinds groups will be managed at the same
time).
■
■
Lighting group
No. 4 controlled
All lighting groups:
1 to 4
Blind group
No. 1 controlled
All blinds groups:
1 to 2
Press and hold the Tilt button
activate blind tilting.
Each successive press of the button
changes the direction of the rotation.
to
3