RS Pro RS-1013 Manual De Instrucciones página 2

Tone Generator and Amplifier Probe/English
Introduction
Congratulations on your purchase of Model RS-1013. This tone generator and amplifi-
er probe set is used to quickly trace and identify cables or wires within a group and also
check the operation of phone lines. It has an important feature，the tone generator has
the function of 220V high voltage protection. With proper use and care, this meter will
provide many years of reliable service.
Specifications
Power: 9V battery (tone generator and probe (1 each)
Tone output: 1kHz, 6V square wave (approximately)
Dimensions: Probe:9x2.25x1(228x57x25.4mm)
Generator: 2.3x2.3x1.35"(58.5x58.5x34.3mm)
Weight: 0.6lb (270gm)
Meter Description
1. Power switch
2. Modular connectors
3. Test leads
4. Battery compartment (rear)
5. Probe tip
6. Volume/Sensitivity control
7. Power button
8. Battery compartment (rear)
9. Headphone jack
1