Technical Assistance - S&P SAHARA 1002 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The SAHARA series models have 3 operating options, with different
powers:
4.- Turn the thermostat control clockwise to its maximum position.
5.- When the room reaches the required temperature, rotate the thermos-
tat control anti-clockwise until it clicks and turns off the device. The red
pilot light should remain on.
When the thermostat control is in this position, the appliance will connect
and disconnect automatically to keep the pre-selected comfort tempera-
ture constant.
MAINTENANCE
These radiators do not require any special maintenance. A dry cloth should
be used to remove the dust from the radiator. The appliance should only
be cleaned when cold, solvents and abrasive products should be avoided.
If the radiator is not going to be used for a long period of time, disconnect
it from the mains, store the cable away in the side compartment and keep
the device in its packaging in a dry place.
Before carrying out any maintenance work, make sure that the device has
been disconnected from the mains.

TECHNICAL ASSISTANCE

The extensive S&P Official Services Network guarantees competent tech-
nical assistance anywhere in Spain. If any anomalies are observed in the
appliance, please contact any of the Technical Services on the list to deal
with your problem.
Any handling of the appliance by persons other than S&P Official Services
will lead to the guarantee being cancelled. (S&P reserves the right to make
any modifications without prior notice).
9

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sahara 1502Sahara 2002Sahara 2502

Tabla de contenido