• Do not lay loose or bent cables next to electrically conductive materials.
• Do not pull on the cables.
Operating the device safetly
WARNING! Electrocution hazard
Always disconnect the power supply when working on the device.
CAUTION! Risk of injury
Do not touch the device during operation. The device contains hot and cold components, moving parts,
and electrical items which may cause injury.
NOTICE! Damage hazard
Avoid strong vibrations. The device will not work properly if it is exposed to strong vibrations.
5 Target group
The mechanical and electrical installation and setup of the device must be performed by a qualified tech-
nician who has demonstrated skill and knowledge related to the construction and operation of automo-
tive and household equipment and installations, and who is familiar with the applicable regulations of the
country in which the equipment is to be installed and/or used, and has received safety training to identify
and avoid the hazards involved.
6 Scope of delivery
Fig.
on page 1
No.
1
2
3
4
5
6
7
8
9
10
11
12
9
10
Quanitity
1
1
2
1
1
4
2
3
4
10
26
4
2
2
Description
Under-bench air conditioner
Remote control
Battery type AAA
Temperature sensor
Receiver
Carbon filter inlay
Mounting brackets
Fast connector
Fastening bracket
Washer
Screw 4 x 20 mm
Screw 3 x 15 mm
Drain pipe
External grids
EN
15