Dometic FreshWell FWX4350EHP Instrucciones De Montaje Y De Uso página 30

EN
Setting the temperature
Cooling mode
In the "Cooling" ( ) and "Dehumidification" ( ) modes a temperature between 16 °C and 31 °C can be set via the
remote control.
1. Ensure that the under-bench air conditioner is switched on.
2. Ensure that the "Cooling" ( ) or "Dehumidification" ( ) mode is activated.
+ –
3. Use the or
A signal tone sounds. The temperature is set on the under-bench air conditioner.
Heating mode
In the "Heating" (
1. Ensure that the under-bench air conditioner is switched on.
2. Ensure that the "Heating" (
+ –
3. Use the or
A signal tone sounds. Afterward the temperature is set on the under-bench air conditioner.
Displaying the temperature
Press the button once to displays, the current interior temperature.
The symbol and the current interior temperature of the remote control are displayed on the remote control dis-
play.
Press the button twice to display the set temperature.
Setting the time
The remote control needs the current time in order to program the timer. The time is indicated on the display of the
remote control.
Note The remote control returns to its initial mode and saves the current setting if no button is pressed on
the remote control for 15 s while setting the time.
Proceed as follows to set the time:
1. Ensure that the under-bench air conditioner is switched on
standby).
2. Press and hold the
The time display flashes.
+ –
3. Use the or
Note Press the
SET
4. Press the
28
button to select the desired temperature.
) mode a temperature between 16 °C and 31 °C can be set via the remote control.
) mode is activated.
button to select the desired temperature.
button for 2 s.
button to set the current time.
+ –
or longer than 2 s to increase or decrease the time faster.
button to confirm the set time setting.
(Switching the under-bench air conditioner on or to