Blatchford ESK4BP30 Instrucciones De Uso página 13

10 Assembly Instructions
The instructions in this section are for practitioner use only.
10.1 Changing Front Stop Buffer
When fitting a new front stop, always re-adjust, and if applicable check length of cylinder if fitted
with an adjustable trunnion. Adjust if necessary. (See previous page.)
1
1
10.2 Changing Shin Stops
Remove shin stops and remainder of
1
adhesive. Clean and lightly abrade mating
surfaces.
1
2
2
1
Shin Stops
13
Apply Loctite 424 on mating surfaces. Press
shin stops into place.
Mating Surfaces
938404PK1/2-0322