Publicidad
Idiomas disponibles
Idiomas disponibles
3 Use
3.1 First use
Thoroughly wash and dry the components
as indicated in section "5 Cleaning and
care".
3.2 Using the blender (Fig. B)
• Insert the blender jug (3) onto the motor
base (8).
• Place the ingredients in the jug (3),
taking care not to exceed the maximum
capacity (1.5 litres - 6 cups).
• Position the lid (2) with the measuring cup
(1) fitted onto the blender jug (3). Ensure
the lid (2) is tightly closed.
• Insert the plug of the blender into the
power socket. The red LED will turn on to
indicate the presence of power.
• Use the control knob (5) to select the
required speed or one of the pre-set
programs.
The PULSE button can be used in
combination with speeds 1 to 3.
START
• Press
the
start
blending.
"4.1 Speed setting suggestions when
using the pre-set programs".
Speeds 1 - 4 allow continuous
blending. You can stop the
operation pressing the STOP
button.
The speed can be changed at any
time during the blending process.
20
button
to
See
the
table
Use
Important
Do not operate at speeds 1-4 for
more than one minute at a time.
• You can add additional ingredients whilst
blending by removing the measuring cup
(1) and pouring ingredients through the
hole in the lid (2).
Danger
The blender is not intended
for blending or grinding dry
foods. Only add dry ingredients
together with a sufficient amount
of liquid to prevent the blender
from overheating, which could
permanently damage the blade
unit.
• If you have selected a speed between 1
and 4, when you have finished blending,
press the STOP button, turn the control
knob (5) to '0' and unplug the blender.
If one of the pre-set programs has
been selected, the appliance will
stop automatically. Refer to section
"4 Functions" for further information.
Cancelling/stopping
blending cycle
The blending cycle can be
cancelled or stopped at any time
pressing the START/ STOP button.
the
Publicidad
