Descargar Imprimir esta página

Parkside PBS 600 B1 Traducción Del Manual De Instrucción Original página 16

Ocultar thumbs Ver también para PBS 600 B1:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54
NOTE
The vibration level specified in these instructions
has been measured in accordance with the
standardised measuring procedure specified
in EN 60745 and can be used to make equip-
ment comparisons. The specified vibration emis-
sion value can also be used to make an initial
exposure estimate. The vibration emission level
varies depending on the use of the power tool
and may be higher than the value specified in
these instructions in some cases. Regular use of
the electric tool in such a way may cause the
user to underestimate the vibration.
WARNING!
For an accurate estimate of the vibration load
during a specific working period, the periods
during which the appliance is switched off or is
running but not actually being used must also
be taken into consideration. This can signific-
antly reduce the vibration load over the total
working period.
PBS 600 B1
General
Power Tool
Safety Warnings
WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
GB │ IE
 13

Publicidad

loading

Este manual también es adecuado para:

275647