Black and Decker LHT2220 Manual De Instrucciones página 14

English
PROBlEM
Slow running, noisy or
hot blades.
Unit will not start.
Tool shuts off abruptly.
Battery pack will not charge. Battery pack not inserted into charger.
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you
or call the BLACK+DECKER help line at 1‑800‑544‑6986.
12
TROUBLESHOOTING GUIDE
POssiBlE CAUsE
Dry, corroded blades.
Blades or blade support bent.
Bent or damaged teeth.
Loose blade bolts.
Battery pack not installed properly.
Battery pack not charged.
Battery pack has reached its maximum thermal limit.
Out of charge. (To maximize the life of the battery
pack it is designed to shut off abruptly when the
charge is depleted.)
Charger not plugged in.
Surrounding air temperature too hot or too cold.
sOlUTiOn
Lubricate blades.
Straighten blade or blade support.
Straighten teeth.
Tighten blade bolts.
Check battery pack installation.
Check battery pack charging requirements.
Allow battery pack to cool down.
Place on charger and allow to charge.
Insert battery pack into charger until LED illuminates.
Plug charger into a working outlet. Refer to Important
Charging Notes for more details.
Move charger and battery pack to a surrounding air temperature
of approximately 65 °F – 75 °F (18 °C– 24 °C).