Publicidad
Idiomas disponibles
Idiomas disponibles
To access the USER MENU:
-
-
Press the Programming and Suction buttons at the same time, then switch the machine on by turning the
ignition key.
Pressing the Programming button, the user can select a parameter, make a change and save the new setting.
Pressing the Suction button, the user can change (increase) the value of the selected parameter or navigate other items
of the user menu.
Pressing the Filter Shaker button, the user can change (decrease) the value of the selected parameter or navigate other
items of the user menu.
Parameter
LANGUAGE
TECHNICAL INFORMATION
BATTERY TYPE
AUTO POWER-OFF
FILTER SHAKER
MACHINE TYPE
SERVICE MENU
START PAGE
RESET HOUR COUNTER
RESET SERVICE HOURS
SERVICE HOURS
EXIT
USER MENU
Description
Sets the language used on the display.
Indicates the Hardware and Software release of the circuit board.
Sets the type of battery installed in the machine, GEL/AGM or ACID (WET).
0 = function not active.
1 - 10 = time from 1 to 10 seconds.
Selects the machine version.
BATTERY = battery powered version.
DUAL POWER = dual power version.
Technical menu
Selection of display logo.
0 = no logo.
1 = standard logo.
2 - 10 = customized logos.
Resets the hour count to zero.
1 = reset hour meter.
Resets the service hours to zero.
1 = reset hour meter.
Activates the "Call Service" message on the display, for maintenance scheduling purposes.
0 = function not active.
50 - 500 = time in hours.
Selected to quit the user menu.
EN
31
Publicidad
