Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, install or operate
the product.
• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for
repairs, it must be shipped in its original packaging to ensure proper protection against damage
that might exceed the initial cause for return.
• Make sure all electrical connections comply with local codes, ordinances, the National Electrical
Code and ANSI/NFPA 70. Hire a qualified electrician or consult a do-it-yourself wiring handbook
if you are unfamiliar with installing electrical wiring.
• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades
to the floor and at least 30 in. from the end of the blades to any obstruction.
• After you install the fan, make sure all connections are secure to prevent the fan from falling.
• The net weight of this fan including the light kit is: 16.94 lbs.
To reduce the risk of fire, electrical shock or personal injury, mount fan to outlet box
To reduce the risk of fire, electrical shock or personal injury, mount to an outlet box
marked "ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. OR LESS" and use
UL-Listed acceptable for fan support of 35 lb. (15.9 kg) or less and use mounting
mounting screws provided with the outlet box. Most outlet boxes commonly used for
screws provided with the outlet box. Most outlet boxes commonly used for the
the support of lighting fixtures are not acceptable for fan support and may need to
support of lighting fixtures are not acceptable for fan support and may need to be
be replaced. Consult a qualified electrician if in doubt.
replaced. Consult a qualified electrician if in doubt.
When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box; do NOT use a
To reduce the risk of fire, electric shock or personal injury, mount the fan to the outlet box marked
plastic outlet box. Secure the outlet box directly to the building structure. The outlet box and its
acceptable for fan support with the screws provided with the outlet box.
support must be able to support the moving weight of the fan (at least 35 lbs.).
NEED HELP? In the event you have broken glass or are missing parts, call 888-251-1003. Do
To avoid personal injury, the use of gloves may be necessary while handling fan parts with
not return the ceiling fan to the place of purchase. Be sure to have available the owner's manual,
sharp edges.
item or model number, finish, color, type of glass, etc.
To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this
Attention Statement needs to read this way.
fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If
your house wire is larger than 12-gauge or there is more than one house wire to connect to the
ATTENTION: The use of a fan brace with all ceiling fans is recommended. Application style
corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.
vary. Braces are sold separately in the lighting or electrical department.
To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed
ATTENTION: Do not use an extension cord with this fan.
control device or control fan speed with a full range dimmer switch.
To reduce the risk of fire, electrical shock or personal injury, do not bend the blade arms when
To reduce the risk of personal injury, use only parts provided with this fan. The use of parts
installing them, balancing the blades or cleaning the fan. Do not insert objects between the
OTHER than those provided with this fan will void the warranty.
rotating fan blades.
Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to
avoid electrical shock.
WARNING
WARNING
3
Publicidad
