LF Harbor Breeze AR09-52WHT Manual Del Usuario página 9

FAN MOUNTING
1.
Insert downrod (D) through canopy (B),
canopy bottom cover (C) and coupling cover.
Thread wires from fan motor assembly (F)
up through downrod (D).
2. Slip downrod (D) into collar, align holes and
re-install clevis pin (N) and cotter pin (M).
Tighten set screws in collar.
3. Carefully lift the fan motor assembly (F) up
to the mounting bracket (A) and seat the
downrod (D) in the mounting bracket (A)
socket. Make sure the tab on the mounting
bracket (A) socket is properly seated in the
groove in the downrod (D). This will help to
balance the ceiling fan.
DANGER: Failure to align slot in ball
with tab may cause the fan to wobble or fall,
which could result in serious injury or death.
1
2
Collar
Set Screw
3
9
Set Screw
Tab
Slot