Makita EN420MP Manual De Instrucciones página 9

TROUBLESHOOTING
State of abnormality
The motor does not start.
The motor stops soon after its start.
The maximum speed is limited.
The blades do not move.
Stop the motor immediately!
The blades do not move.
Stop the motor immediately!
The blades do not move.
Stop the motor immediately!
The unit vibrates abnormally.
Stop the motor immediately!
The blades do not stop.
Stop the motor immediately!
OPTIONAL ACCESSORIES
CAUTION:
These accessories or attachments are recom-
mended for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might present a
risk of injury to persons. Only use accessory or attachment for its
stated purpose.
If you need any assistance for more details regarding these accesso-
ries, ask your local Makita Service Center.
• Blade set
• Grease set
NOTE: Some items in the list may be included in the tool package
as standard accessories. They may differ from country to country.
Probable cause (malfunction)
Refer to the instruction manual of the power unit.
Refer to the instruction manual of the power unit.
Refer to the instruction manual of the power unit.
Inappropriate angle of cutter unit.
A twig is caught by the blades.
The drive system does not work properly.
The drive system does not work properly.
The power unit does not work properly.
9 ENGLISH
Remedy
Refer to the instruction manual of the power unit.
Refer to the instruction manual of the power unit.
Refer to the instruction manual of the power unit.
Make sure the angle lock engages properly.
Remove the foreign matter.
Ask our authorized service center to inspect and repair it.
Ask our authorized service center to inspect and repair it.
Refer to the instruction manual of the power unit.