ENGLISH
-
The appliance must be placed at least 5 m away from TVs, radios, or antennas.
-
The appliance must be placed in such way that the plug is accessible and the socket must
be properly earthed to avoid electric shocks.
-
Make sure to close the microwave door for proper operation.
-
In case there is any manufacturing remains in the microwave cavity or on the heating
elements, leave the microwave open to ensure good ventilation. In such case, it is
recommended to heat a glass of water at high power for several times.
Warning
Do not remove the mica plate.
3. OPERATION
Using the microwave
-
Once the appliance is plugged in, it will beep once and the display will show '1:00' and
'CLOCK'.
-
During the setting configuration, the microwave will return to Standby mode after 30
seconds of inactivity.
-
During the cooking process, press Stop/Cancel to stop operation, or press twice to cancel.
-
When the cooking programme has finished, the appliance will beep every 2 minutes and
the display will show 'End'.
-
During operation, the appliance will beep once every time a valid button is pressed. If the
action is invalid, the appliance will beep twice.
-
The microwave is equipped with a safety cooling system. If in use for more than 2 minutes,
the fan in the appliance will switch on for about 3 minutes to cool down the microwave
when the door is opened or after a cooking programme has been completed.
Setting the time
-
The microwave has a 24-hour clock. During operation, press the Weight/Clock button to
view the current time.
-
In Standby mode, press the Weight/Clock button once.
-
Turn the Time/Menu knob to set the hour value.
-
Press the Weight/Clock button once to confirm the time.
-
Turn the Time/Menu knob to set the minutes.
-
Press the Weight/Clock button once to confirm the settings.
QuickStart
-
When this programme is selected, the appliance will cook the food in a short time at
maximum power (100% microwave power).
-
Open the door and place the food in the microwave. Close the door.
52
CONVECTION 2500