identités NEO FASHION Manual De Instrucciones página 7

cables are not bent as this may affect the operation of the brakes when assembled.
PRODUCT USE
The Neo Fashion rollator is a walking aid for people with reduced mobility. This product is intended for use indoors and outdoors
and can be folded up for easy storage or transport.
SAFETY PRECAUTIONS
Failure to follow the safety precautions may result in the risk of serious injury.
▪
Do not exceed the maximum weight limit of 136 Kg.
▪
Do not exceed the maximum load of 5 kg in the basket. Loads must only be transported in the basket. Do not hang heavy
objects on the rollator as this could affect its stability.
▪
Do not use the rollator on stairs or escalators.
▪
Use only accessories and parts supplied by the manufacturer.
▪
Make sure that the knobs are tightened to the same level and the handles are securely fastened.
▪
The rollator is a walking aid. It is not a wheelchair. It is not designed to carry a person sitting on it. Such use may damage the
wheels and the structure of the rollator itself. The rollator could be weakened and no longer meet its mechanical character-
istics in future use. Only use the rollator as a walking support.
▪
Do not use the rollator to walk backwards.
▪
Always sit on the seat when the rollator is stationary and the brakes are locked. Serious injury to the user and/or damage to
the rollator frame and/or wheels can result from inappropriate use.
▪
Make sure all parts (wheels, cables, handles, brakes) are secure and in good working order.
▪
Do not make any adjustments to the rollator while it is in use. All wheels must always be in contact with the ground.
▪
Check that the brakes function properly before use.
▪
Make sure that the parking brakes are securely attached.
▪
When the rollator is in the stationary position, the brakes must be locked. Do not attempt to move the rollator if the brakes
are locked.
▪
Be sure to put your hands on each handle so that the rollator can be in the parallel force position. Make sure the seat is
clipped flat before use.
▪
Make sure the seat tube caps are present.
▪
During use, lock the parking brakes for all actions.
▪
Do not attempt to push the rollator while someone is sitting in the seat.
▪
Do not use the seat to carry objects.
▪
Do not use the seat without the backrest.
▪
Do not sit in the seat when the rollator is on a slope.
▪
The brakes must be in the locked position before sitting in the seat.
▪
Do not attempt to reach objects while sitting down by leaning forward. Do not lean backwards as this can cause the rollator
to tip over.
▪
Be careful when walking up pavements or on inclined, uneven, or slippery surfaces. Failure to do so may result in a significant
risk of falling or injury.
▪
Do not use the rollator on a wet, frozen, or snow-covered slopes. If any parts are damaged, broken or worn, contact the
dealer.
ASSEMBLING
Before assembly consult a suitably qualified healthcare professional regarding the correct height adjustment for maximum
support, and correct brake activation.
1. Check all wheels are in good working order and roll freely.
2. Check the basket is securely fixed and all fixing buttons are tightly fastened
3. To assemble; insert the front & rear wheels, using the button clips on the rear wheels and the "E" Clips on the front to position.
4. Fit the back rest into the frame and secure with snap clips.
5. To set the seat height, with the rollator frame open, push down on the seat until all four wheels are extended and the cross
member is in line. The seat height can be adjusted by sliding the wheel assemblies in the frame tubes and positioning using the
button & "C" clips. Make sure that all the clips "click" into position and all four wheels make contact with the floor and the rollator
is stable.
6. Set the correct height of the handlebars, as follows:
DMI-F-10_Annexe 2_Notice.7
Mai 2023
Page 7 sur 15