cecotec PROCLEAN 2010 Manual De Instrucciones página 47

1. PARTS AND COMPONENTS
Fig. 1
1. Door lock system
2. Glass turntable
3. Turntable ring assembly
4. Shaft
5. Display window
6. Mica plate
7. Control panel
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
- Use a damp cloth to clean the inside of the appliance and the removable parts. Make sure
that all parts are dry before using the appliance.
- Make sure that the appliance is switched off before plugging it to the mains.
- The microwave door must be closed in order to operate.
- The appliance must be placed in such way that the plug is accessible and the socket must
be properly earthed to avoid electric shocks.
- In case there is any manufacturing remains in the microwave cavity or on the heating
elements, leave the microwave open to ensure good ventilation.
- In such case, it is recommended to heat a glass of water at high power for several times.
3. OPERATION
Control panel. Fig. 2
The microwave panel has 2 selector knobs:
ENGLISH
47
PROCLEAN 2010