Descargar Imprimir esta página

McCulloch MTO001 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
IDENTIFICATION OF SAFETY SYMBOLS
use can cause serious injury. You should not touch the blade without
turning off the machine.
after using a while.You should not touch it before cooldown.
Read the operator's manual before use. Failure to follow instructions
could result in serious injury. Save operator's manual.
WARNING:
appliances, basic safety precautions must al-
ways be followed to reduce the risk of fire and
serious injury. Read and follow all instructions.
DANGER:
THIS POWER TOOL CAN
BE DANGEROUS! This unit can cause seri-
ous injury to the operator and others. The
warnings and safety instructions in this man-
ual and the powerhead manual must be fol-
lowed to provide reasonable safety and effi-
ciency in using this unit. The operator is re-
sponsible for following the warnings and in-
structions in this manual, the powerhead
manual, and on the unit. Never allow chil-
dren to use this tool.
SAFETY INFORMATION
ON THE UNIT
DANGER:
RISK OF CUT; KEEP HANDS AWAY
FROM BLADE - This unit can cause serious injury including
amputation.
WARNING:
This unit can be dangerous! Careless or improper
WARNING:
The surface of the whole gear box might be hot
Hazard zone for thrown objects.
• Blade can throw objects violently.
• You and others can be seriously injured.
• Keep children, bystanders, and animals
50 feet (15 meters) away.
Always wear:
- A protective helmet
- Hearing protection
- Approved eye protection
- Approved protective gloves
SAFETY RULES
When using gardening
OPERATOR SAFETY
DANGER:
HANDS AWAY FROM BLADE
moves momentarily after the trigger is re-
leased. Do not attempt to clear away cut ma-
terial when the blade is in motion. Make sure
the switch is in the OFF position, the spark
plug wire or power source is disconnected,
and the blade has stopped moving before
removing jammed material from the cutting
blade. Do not grab or hold the unit by the
cutting blade.
• Dress properly. Always wear safety glasses
or similar eye protection when operating, or
performing maintenance on your unit (safety
glasses are available).
• Always wear heavy, long pants, long sleeves,
boots, and gloves.
4
RISK OF CUT; KEEP
- Blade

Publicidad

loading